GGPO® Clear Film FL890J 200 MICRONS

FL890J belongs to GGPO® Greenhouse film family, which is 3rd generation greenhouse films, they offer a super long anti-drip performance. The thickness of this film is 200μm, and it provides high direct light, which is suitable for growing Tomatoes/Peppers/Cucumbers/Melons/Roses/Carnation. For areas with low sunlight exposure at high latitudes is also suitable. This film is widely used in extrem enviroment to take heavy jobs.

Send email to us Contact Us

Product Detail

H2: Product Overview

FL890J is an ultra-heavy-duty 200μm (8 mil) 5-layer co-extruded film engineered as the flagship heavy-gauge solution in our polyolefin greenhouse film lineup. Developed for extreme climates and commercial growers requiring maximum structural resilience, FL890J delivers an exceptional 91% direct PAR light transmission. It serves as an ideal high transmission greenhouse film environments, combining extreme tear resistance with advanced anti-drip and anti-fog technology to protect high-value crops against severe winds, heavy snow loads, and low sunlight conditions.

Key Performance Benefits

Maximum 200μm Commercial Gauge: Ultra-thick 8 mil construction provides ultimate puncture resistance, structural rigidity, and exceptional wind/snow load tolerance for long-term commercial operations.
91% Direct Light Transmission: Maximizes usable photosynthetic active radiation (PAR) inside the greenhouse, driving faster crop growth and higher yield in light-restricted regions.
Advanced Anti-Drip & Anti-Fog Layer: Long-lasting internal coating prevents condensation droplets, reducing crop disease vectors while maintaining maximum light penetration.
UV-Open & Bee-Friendly Formula: Allows natural UV spectrum transmission required for optimal bumblebee navigation, effective pollination, and rich crop pigmentation.
Pesticide & Thermal Protection: Formulated with high-grade chemical stabilizers to resist sulfur and pesticide degradation while retaining vital night heat.

Technical Specifications

Film Thickness: 200 μm (8 mil)
Light Transmission Rate: 91%
Tensile Strength: 26 MPa
Elongation at Break: 700%
Tear Resistance: 90 kN/m
Available Roll Widths: 1 to 16 meters
Fold Types: 2 Folds or 4 Folds

Recommended Crops and Applications

FL890J is engineered for heavy-duty commercial setups, high-value crop production, and challenging geographic zones:

Fruiting Vegetables: High-wire tomatoes, bell peppers, cucumbers, and melons.
Floriculture: High-end cut flowers including roses, carnations, and specialty lilies.
Geographic Suitability: Perfect for extreme high-latitude regions, wind-prone coastal zones, and heavy snow areas across Northern Europe, North America, and Central Asia.

How This Model Compares

Compared to 150μm (FL690H) and 180μm (FL790I) models, FL890J provides the highest puncture resistance and longest operational lifespan in the series. For operations requiring soft light diffusion instead of direct transmission, explore light diffusion greenhouse films. For structural side-wall reinforcing or extreme storm zones, consider woven covers.

H2: Quality Control and Test Documentation

Manufactured under strict ISO-certified manufacturing protocols, every production lot of FL890J undergoes comprehensive quality testing:

Optical spectrophotometer testing ensuring a guaranteed 91% PAR pass-through.
Dart drop impact and 26 MPa tensile strain verification to ensure structural integrity.
Delivered with a complete Technical Data Sheet (TDS) and factory quality certificate per order.

Installation and Correct-Side Orientation

To maximize the service life and preserve the anti-drip coating, follow these installation rules:

Correct Orientation: The specialized coating layer must face inside the greenhouse. Identify the printed text/logo on the film to confirm orientation.
Coating Protection: Prevent the outer coating layer from rubbing against rough surfaces during unpacking, cutting, and installation.
Recommended Mounting Hardware: Use locking profiles and wiggle wires to secure the film without causing friction damage.
Corrosion Avoidance: Never attach film directly to rusted metal supports. Clean or paint structural steel pipes prior to installation.
Structure Geometry: Ensure continuous roof slopes with no dead bends or sagging pockets where rainwater can pool.
Installation Timing & Force: Install during early morning or dusk. Apply higher tension during cold winter setups and moderate tension during summer months.
Initial Humidity Setup: Raising internal greenhouse humidity to 70% during initial installation helps activate peak anti-drip performance.

Warranty Conditions

FL890J offers our longest pro-rated commercial factory warranty:

4-Year Warranty: Central Africa, Middle East, and high-UV extreme climate zones.
5-Year Warranty: East Asia, Southeast Asia, North/South America, Australia, and Europe.

Packaging, MOQ and Lead Time

Packaging: Export-grade heavy-duty UV protective wrap on solid cores.
MOQ & Production Capacity: Factory MOQ applies; backed by an annual manufacturing capacity of 25,000 metric tons.
Lead Time: 14–21 business days for standard roll sizes; rapid TDS and sample dispatch available.

Frequently Asked Questions

Why choose a 200-micron film over thinner options?

The 200-micron gauge offers superior tear strength, exceptional wind/snow load resistance, and our longest warranty coverage (up to 5 years), making it the most cost-effective long-term choice for heavy-duty commercial greenhouses.

How do I confirm the anti-drip side during setup?

Look for the printed logo/text marks on the film surface. Ensure the text reads correctly from the inside so that the anti-drip coating faces toward your crops.

Does FL890J allow bee pollination?

Yes, the UV-open formulation allows natural UV light wavelengths to pass through, ensuring normal bumblebee navigation and active pollination inside the greenhouse.

Tag：High-Tensile Polyolefin Greenhouse Film