GGPO® Diffused Film FL887J 200 MICRONS

FL887J is an ultra-heavy-gauge 200μm (8 mil) 5-layer co-extruded light-diffusing cover, engineered as the flagship heavy-duty diffusion model in our polyolefin greenhouse film selection. Designed specifically for extreme climates, high-altitude regions, and heavy-duty commercial installations, FL887J scatters direct sunlight into uniform, soft PAR light to eliminate crop scorch and internal heat spikes. Combining maximum puncture resistance with advanced anti-drip and anti-fog technology, it provides superior physical durability and optimal light distribution for commercial operations in extreme weather zones.

Technical Specifications

• Film Thickness: 200 μm (8 mil)

• Light Transmission Rate: 88% – 90%

• Haze / Diffusion Rate: High Light Diffusion (Scattered PAR)

• Tensile Strength: 26 MPa

• Elongation at Break: 700%

• Tear Resistance: 90 kN/m

• Available Roll Widths: 1 to 16 meters

• Fold Types: 2 Folds or 4 Folds

Recommended Crops and Applications

FL887J is engineered for heavy-duty commercial operations requiring maximum structural reliability and light scattering greenhouse plastic:

• Fruiting Crops: High-density, high-wire crops including tomatoes, cucumbers, peppers, and melons.

• Floriculture & Nursery: High-value commercial cut flowers (roses, carnations, orchids) sensitive to direct solar scorch.

• Geographic Suitability: Built for extreme weather zones, intense solar radiation climates, wind-exposed coastal areas, and high snow-load regions across North America, Europe, and Central Asia.

Quality Control and Test Documentation

Manufactured under strict ISO-certified manufacturing protocols, every lot of FL887J is thoroughly inspected before global shipment:

• Spectrophotometer verification to confirm light transmission and haze diffusion percentages.

• Dart-drop impact, 26 MPa tensile strain, and 90 kN/m tear resistance testing per batch.

• Supplied with a certified Technical Data Sheet (TDS) and factory quality inspection report.

Installation and Correct-Side Orientation

To maximize physical longevity and maintain the anti-drip coating, follow these installation practices:

• Correct Orientation: The specialized anti-drip coating layer must face inside the greenhouse. Check the printed text/logo on the film surface for correct alignment.

• Surface Care: Avoid rubbing or dragging the coated surface across rough ground or metal framework during installation.

• Recommended Mounting Hardware: Secure using locking profiles and wiggle wires to prevent friction wear along contact points.

• Corrosion Protection: Never install directly over rusted structural steel. Clean, treat, or paint frames prior to covering.

• Structure Geometry: Ensure continuous roof slopes with no dead bends or sagging pockets where rainwater can pool.

• Installation Tension & Timing: Install during cooler morning or dusk hours. Apply firmer tension during winter setups and moderate tension during summer months.

• Initial Humidity Activation: Maintaining internal greenhouse humidity near 70% during initial setup helps activate peak anti-drip performance.

Diffused Greenhouse Film 200 Micron FAQ

What makes 200-micron FL887J ideal for severe weather regions?

The 200-micron gauge provides exceptional tear strength and puncture resistance, allowing greenhouses to withstand heavy snow loads, high wind forces, and extreme temperature fluctuations over a 5-year operational lifespan.

How do I confirm the anti-drip coated side during installation?

Check the printed directional logos on the film surface. Ensure the text reads correctly from inside the greenhouse, placing the anti-drip coating layer facing your crops.

Does the light diffusion in FL887J hinder bee activity?

No, FL887J utilizes a UV-open formulation that allows natural UV light wavelengths through, enabling normal bumblebee orientation, navigation, and pollination.