...
English

GGPO® Diffused Film FL887J 200 MICRONS

FL887J belongs to GGPO® Greenhouse film family,which is 3rd generation greenhouse films , they offer a super long anti-drip performance. The thickness of this film is 200μm, and the light type is diffuse light, which is suitable for crops which are vulnerable to sun exposure, fond of soft light or with tender leaves. such as Lettuce, baby leaf, Strawberries, Blueberries,Butterfly orchid, red palm, etc.
Greenhouse with such films have a temperature that heats gently and maintains stable temperature, avoiding sharp temperature rise. Advantages:Prevents leaf scorch and reduces damage from intense sunlight.

Product Detail

FL887J is an ultra-heavy-gauge 200μm (8 mil) 5-layer co-extruded light-diffusing cover, engineered as the flagship heavy-duty diffusion model in our polyolefin greenhouse film selection. Designed specifically for extreme climates, high-altitude regions, and heavy-duty commercial installations, FL887J scatters direct sunlight into uniform, soft PAR light to eliminate crop scorch and internal heat spikes. Combining maximum puncture resistance with advanced anti-drip and anti-fog technology, it provides superior physical durability and optimal light distribution for commercial operations in extreme weather zones.

Technical Specifications

  • Film Thickness: 200 μm (8 mil)

  • Light Transmission Rate: 88% – 90%

  • Haze / Diffusion Rate: High Light Diffusion (Scattered PAR)

  • Tensile Strength: 26 MPa

  • Elongation at Break: 700%

  • Tear Resistance: 90 kN/m

  • Available Roll Widths: 1 to 16 meters

  • Fold Types: 2 Folds or 4 Folds

Recommended Crops and Applications

FL887J is engineered for heavy-duty commercial operations requiring maximum structural reliability and light scattering greenhouse plastic:

  • Fruiting Crops: High-density, high-wire crops including tomatoes, cucumbers, peppers, and melons.

  • Floriculture & Nursery: High-value commercial cut flowers (roses, carnations, orchids) sensitive to direct solar scorch.

  • Geographic Suitability: Built for extreme weather zones, intense solar radiation climates, wind-exposed coastal areas, and high snow-load regions across North America, Europe, and Central Asia.

Quality Control and Test Documentation

Manufactured under strict ISO-certified manufacturing protocols, every lot of FL887J is thoroughly inspected before global shipment:

  • Spectrophotometer verification to confirm light transmission and haze diffusion percentages.

  • Dart-drop impact, 26 MPa tensile strain, and 90 kN/m tear resistance testing per batch.

  • Supplied with a certified Technical Data Sheet (TDS) and factory quality inspection report.

Installation and Correct-Side Orientation

To maximize physical longevity and maintain the anti-drip coating, follow these installation practices:

  • Correct Orientation: The specialized anti-drip coating layer must face inside the greenhouse. Check the printed text/logo on the film surface for correct alignment.

  • Surface Care: Avoid rubbing or dragging the coated surface across rough ground or metal framework during installation.

  • Recommended Mounting Hardware: Secure using locking profiles and wiggle wires to prevent friction wear along contact points.

  • Corrosion Protection: Never install directly over rusted structural steel. Clean, treat, or paint frames prior to covering.

  • Structure Geometry: Ensure continuous roof slopes with no dead bends or sagging pockets where rainwater can pool.

  • Installation Tension & Timing: Install during cooler morning or dusk hours. Apply firmer tension during winter setups and moderate tension during summer months.

  • Initial Humidity Activation: Maintaining internal greenhouse humidity near 70% during initial setup helps activate peak anti-drip performance.

Diffused Greenhouse Film 200 Micron FAQ

What makes 200-micron FL887J ideal for severe weather regions?

The 200-micron gauge provides exceptional tear strength and puncture resistance, allowing greenhouses to withstand heavy snow loads, high wind forces, and extreme temperature fluctuations over a 5-year operational lifespan.

How do I confirm the anti-drip coated side during installation?

Check the printed directional logos on the film surface. Ensure the text reads correctly from inside the greenhouse, placing the anti-drip coating layer facing your crops.

Does the light diffusion in FL887J hinder bee activity?

No, FL887J utilizes a UV-open formulation that allows natural UV light wavelengths through, enabling normal bumblebee orientation, navigation, and pollination.

Tag：High-Tensile Polyolefin Greenhouse Film

Leave Your Message