GGPO® Clear Film FL690H 150 MICRONS
FL690H belongs to GGPO® Greenhouse film family, which is 3rd genenration greenhouse films, they offers a super long anti-drip performance. The thickness of this film is 150μm, it provides straight light to plants, which is suitable for growing Tomatoes/Peppers/Cucumbers/Melons/Roses/Carnation. And high areas with low sunlight exposure at high latitudes are also suitable. This film is a standard film for most regions worldwide.
Features
- Super clear
- Anti-Drip
- Anti-Dust
- Anti-Algae
- Anti-Fog
- UV-OPEN
- Bee Friendly
- High Pesticide resistance
- Thermic
Products Details
- Thickness: 150 μm.
- Light transmission rate: 91%.
- Tensile Strength:26 MPa
- Elongation at break: 700%
- Tear resistance: 90kN/m
- Avaliable width:1~16 meters.
- Warranty: 2 years . (Central Africa/ Middle East etc) & 3 years ( East Asia/SE Asia/America/Australia/Europe etc)
- Fold Type: 2 or 4 Folds
Installation Manuals
- GGPO® Greenhouse film's Coating layer is at outer layer surface, so it need to be installed towards inside the greenhouse side. When cutting film or installing the films, please avoid rubbing against the outer surface, which may affect the dripping effect.
- We highly recommend you to use our LOCKUP® Locking Profiles and VINIPET® Wiggle wires to fix the GGPO® greenhouse film to avoid the friction beween greenhouse structure and films. Pay attention to anti-corrosion of steel pipes . It is forbidden to use rusty steel pipes.
- When covering the greenhouses, there should be a reasonable angle and no dead bends, concave pockets, or other phenomena; Repeated friction is prohibited when fastening the films.
- It is recommend to install the GGPO® Greenhouse film in morning or in dusk. In winter, please use more force during installation, in summer, please use less force during installation.
- Carefully distinguish the 2 sides of GGPO® Greenhouse film, let the coating layer installed towards inside of greenhouses, you can see the right marke or logo printed on the films.
- It is recommend to humidified to 70% in the greenhouse for initial installation.
